You can download this magazine in sections with all editorial and advertisement web addresses as live hyperlinks.
Other downloadable back issues.
Contact addresses for the Factfinder reader enquiry numbers in this month's magazine
FILM & SHEET PRODUCTION
Download this section (615 KB)
High productivity from PET direct extrusion sheet line.
A PET thermoforming sheet line which has been running without pre-drying at a Danish company for more than a year has been augmented with a second line.
Reifenhäuser ships its latest wide film line to China.
Very wide cast film is being produced in China to make a variety of food packaging. Reifenhäuser has recently installed its third line there with a 4·6 m slot die for three-layer PP film.
Cast film producers adopt fast set-up die.
The Contour Die introduced two years ago by Extrusion Dies Industries has seen substantial uptake, with orders for 35 dies to make cast film, sheet, and coated products.
FILM & SHEET CONVERSION
Download this section (698 KB)
Aluminium air shafts reduce weight.
Simplex-Turbulo is UK agent for new Neuenhauser Vorwald MB pneumatic air shafts made in high strength aluminium for lightness in weight.
Skymark extends CI printing capability.
The Skymark Group has bought a further Fischer & Krecke Flexpress 16S 8 colour CI flexographic printing press from Edlon Machinery for its main print facility at Leominster and has placed a tentative order for a 3rd F&K press for early 2006 delivery.
Simplified recovery of formed sheet edge trim.
Recovery of edge trim from profiled cast thermoforming sheets, sometimes difficult with conventional feeding equipment, is said to be simplified by the new Hellweg LSZ 150/110 shredder.
New beam saws improve sheet handling.
Two Schelling FLM 330 precision beam saws have been installed by Silwood Plastics and a third is due in August. Among the benefits they bring is a new cutting process which enables material as thin as 0.8 mm to be handled with no corner slippage.
Safety is enhanced on new winder.
Enhanced operator safety is claimed by Brampton Engineering for its new surface winder.
Formed packaging sealant cured by UV in seconds.
New Dymax Ultra Light-Weld 3081 and 3082 sealants supplied by Intertronics are intended for thermoformed clamshell and tube packaging in PVC, PET and R-PET. They cure in seconds on exposure to UV light.
Infrared system cuts cost and power in sheet heating.
Faurecia has significantly reduced heating times involved in the manufacture of automotive soundproofing panels after a medium wave infrared system was installed by Heraeus Noblelight.
New ownership for Eltex agent.
Arrowquint, the UK agent for electrostatic equipment specialist Eltex, has been bought by long-time plastics ancillary equipment salesman Kevin Horne and his business partner Brian Bayes.
Extrusion welder for membranes and containers.
The new Leister Fusion 3.0 welder supplied by Welwyn Tool is intended for industrial container engineering, landfill membrane repairs and general plastics fabrication.
Static difficulties get elastic in a twist.
A pair of ionisers installed by TBA Electro Conductive Products has eliminated difficulties caused by static at Bemis, which makes adhesives, coatings and special films.
Scottish bag tax proposal is echoed around the world.
The plan to impose a tax on plastic carrier bags proposed a year ago by Scottish MP Mike Pringle could be debated by the Parliament in the Autumn, and if it is passed, the legislation could be in force as early as 2007.
Improved performance polycarbonate films from Bayer.
Two new grades of Makrofol polycarbonate film from Bayer MaterialScience have been tailored for improved performance in medical applications, to resist sterilisation, and more general printing work with increased surface conductivity to dissipate static charges.
Cast acrylic shows pictures at an exhibition.
The Barlo Cast Vision range of materials has been introduced by Quinn Plastics to make projection screens. It has variants for front, rear and through projection.
Debate over degradables.
Degradable polyethylene bags are not all they're cracked up to be, according to the International Biodegradable Polymers Association (IBAW). And the attack on biodegradables from the very organisation one would expct to be promoting their merits has brought angry response from companies involved in their manufacture.
Speakers formed from a single piece of Perspex.
The FH001 high definition acoustic speakers for Ferguson-Hill are being made in 8 mm Perspex acrylic sheet by Display Developments, formed in one piece to leave no unsightly tooling marks or joins.
Digital printing goes 3D.
Digital printing technology has been combined with film insert moulding by Bayer MaterialScience using its Makrofol polycarbonate film.
Medical moisture barrier film is transparent.
New Honeywell Aclar Flex moisture barrier film is a crystal clear PCTFE material that allows the end user to see into flexible medical packages that were previously opaque.
New possibilities in leisurewear.
High breathability of new Desmopan DP 6580A moisture vapour transmission TPU developed by Bayer MaterialScience could open up new possibilities for coating sports and leisurewear.
Traffic sign less attractive to thieves - until the price of PC reaches that of aluminium.
A traffic sign incorporating LEDs to light an acrylic face has been developed by Barkston. Need for external lamps, which consume 85 per cent more energy, and the use of expensive materials such as aluminium is avoided and local authority highway departments, at whom the products are aimed, can reduce costs.
PC diffuser film resists higher temperatures from latest LCDs.
Illuminex optical diffuser film made by GE Advanced Materials for LCD backlighting applications is now being offered for TVs, notebook PCs, computer monitors and automotive GPS displays.
INJECTION MOULDING
Download this section (719 KB)
Sequential gating makes a moulding cycle make more.
Sequential valve gating can squeeze more out of an injection moulding machine by enabling family moulding, making different parts in the same mould in the same cycle. Windsor Kunststofftechnologie has developed sequential valve gating systems with this in mind.
Boy opens new British showroom.
Boy has now left the former Spaceminster building in Milton Keynes and opened up its own showroom.
Rotating mould process for automotive panels.
The Quadloc-Tandem-Index system from Husky has gone commercial with Lear Corporation using it on automotive interior and exterior components.
Arburgs added by in-house and trade moulders.
Money Controls and Tex Industrial Plastics have both recently installed new Arburg machines.
Pressure sensors for small moulds.
Kistler has introduced sub-miniature pressure sensors for indirect cavity pressure sensing in small moulds in which conventional sensors cannot be used.
Thinwall packaging technology now pitches at the tin can market.
The innovative Im-Pak injection-compression process for packaging has been moved in yet another direction with the Total-Block process in which a layer of aluminium foil is encapsulated within the container wall.
Cycle counter keeps track of mould life.
A counter to record how many cycles a mould has performed in a given period such as an hour or a shift, since the last maintenance check or in its lifetime, has been introduced by DMS. It measures electronically and has no moving parts.
ENGINEERING MATERIALS
Download this section (393 KB)
Improved polycarbonates for medical work.
Three more biocompatible polycarbonates have been added to GE Advanced Materials' range for healthcare applications.
Radici expands its TPE series.
The Plastics Division of RadiciGroup is developing a new series of thermoplastic elastomers which includes COPE-based (copolyester-ether) TPEs under the brand name Heraflex E, and styrene-based TPEs under the Heraflex A name.
Merquinsa introduces plasticiser-free TPU elastomers.
Spanish PU specialist Merquinsa has entered the soft thermoplastic elastomers market with plasticiser-free thermoplastic polyurethanes based on new proprietary technology.
Overmoulded TPE makes beer crates more comfortable to carry.
A customised grade of Kraiburg TPE's Thermolast K thermoplastic elastomer based on hydrogenated styrenic block copolymers was developed for an unusual two-component moulding application - making the carrying handles of beer crates more comfortable.
Providing clean water could have $multi-billion potential.
The need to provide readily accessible drinking water in developing countries is likely to fuel $95 billion in capital investment over the next 10 years according to GE Advanced Materials. In response the company has set up a Fluid Engineering Centre of Excellence in Bergen op Zoom in the Netherlands to research, develop and test new materials for use in the provision of potable water.
Nylon 6 flows even further.
Even higher flow is promised by two new grades of Durethan nylon 6 from Lanxess.
PBT/PET resist soldering temperatures.
Grades of Pocan thermoplastic polyester have been developed by Lanxess with high heat resistance to withstand the temperatures of reflow and vapour phase soldering.
Innovative PVDF with adhesion performance.
Arkema has introduced a range of reactive polyvinylidene fluoride polymers and copolymers which open up new possibilities by their ability to adhere to a range of materials.
ADDITIVES
Download this section (351 KB)
Biggest plastics additives business opens its doors...
Crompton Corporation's takeover of Great Lakes Chemical Corporation to form the world's biggest plastics additives company has brought a new name into the market - Chemtura Corporation.
...and appoints UK distributor.
Crompton's plastics additives can now be obtained from Brenntag (UK).
Azodicarbonamide blows in from China.
Chemical blowing agents new from Chance & Hunt are based on azodicarbonamide and made in China to the company's specification.
Three more light stabilisers from BASF.
Three grades have been added to BASF's Uvinul range of light stabilisers - a benzotriazole and two hindered amine light stabiliser products.
Cornelius adds nanocomposites.
Three new nanocomposites from Hanse Chemie are now available in the UK from distributor Cornelius. The products can be used as raw materials for coatings and varnishes or as reinforcing additives for a wide variety of industrial applications including adhesives, fibre composites, electrical and electronic applications.
Nano-particulate flake glass fillers.
Development work by Glassflake has enabled the company to reduce the thickness of its flake glass products to the nano scale.
What to use now curing with lead is forbidden.
Rubber processors can now no longer use lead in their formulations for components for passenger cars and commercial vehicles. Rhein Chemie has an answer.
MATERIALS HANDLING
Download this section (954 KB)
Integration is the key to effective materials handling.
In the February issue of British Plastics & Rubber we described in some detail the new Controlnet network-based structure for controlling materials handling equipment from Motan. Here the company goes into more detail about the rationale behind it.
Colortronic bus route makes all the right connections.
CMS Touch Control developed by Colortronic for use with centralised conveying systems is based on a standard PLC with connections to all hopper loaders via a single two core cable.
New driers for small to large throughputs.
New Colortronic Dry Flex driers range from a unit with a 15 litre hopper and a throughput of 20 - 25 kg/hr for direct mounting on a machine or mobile frame to central driers with capacity up to 2 tonnes/hr.
Mind your backs.
Manual handling of sheets or sacks of granules is a health risk. One of the latest machines to reduce the strain of manual handling is the Fezer VacuPowerlift for which Granada Material Handling is now the UK distributor.
Motan replaces its loader range.
Metro loaders for centralised conveying systems have been introduced in a capacity range from 0·5 to 30 litres by Motan to replace all previous models.
Hopper loader series is upgraded.
Additions and upgrades have been made to the Colortronic hopper loader range. The new CSP-E single conveying unit is for low to medium throughputs and the CSP-G is intended to form part of a central system to convey 1,500 kg/hr over long distances.
Volumetric doser can be calibrated gravimetrically automatically.
Plastics bearing manufacturer Sarnatech BNL has installed four of Movacolor's new MC30 dosing units at its North Yorkshire facility for dosing relatively small amounts of colour masterbatch.
Small batch blender is improved.
Maguire MicroBlender small batch gravimetric blenders now have stainless steel hoppers as standard instead of the powder coated carbon steel used previously. In addition the company reckons to have eliminated the possibility of jamming in the pneumatic vertical valves which dispense ingredients into the blender.
Long distance - no problem.
An extension to an existing production plant by one of Colortronic's customers proved a challenge in terms of material conveying. Bulk material could only be stored in a location some distance from the main production hall where additional machines were to be located. The route planned for the pipework was 318 m long, with a 5 m vertical lift and the need for nine bends in the pipework.
Crammer deals with awkward regrind.
A gravimetric batch blender from TSM Control Systems is being promoted for its ability to blend in flaked regrind. The machine pressurises regrind using TSM's reverse flight auger screw, to ensure thorough blending, or enable moulders to process 100 per cent regrind.
PIPE & PROFILE EXTRUSION
Download this section (666 KB)
World's biggest conical twin screw.
What is claimed to be the world's largest twin conical screw extruder, has been built by Cincinnati Milacron for new applications in wood fibre/plastics composites.
Material monitor for extrusion control.
The Smart Hopper II has been designed by Colortronic to monitor material consumption of extrusion lines and control extruder throughput and haul off equipment. It is said to achieve an accuracy of ±0·5 per cent.
Temperature and pressure together.
The Model µ500PT dual channel process indicator newly introduced by Terwin Instruments is intended to measure extrusion pressure and temperature simultaneously with transducers such as the company's 2000 series.
Easier maintenance for elastomer leak prevention.
The roll cartridge of the Davis-Standard ELF (Elastomer Leakage Free) feed section is now on a removable assembly to facilitate maintenance.
COMPOSITES
Download this section (666 KB)
Atoglas launches acrylic enhancers for unsaturated polyesters.
Altuglas BS materials are acrylic copolymers in the form of beads that confer low shrink and low profile characteristics.
FINISHING
Download this section (666 KB)
UV adhesive for needle bonding.
Intertronics has introduced a light curing adhesive for bonding needles, syringes and other stainless steel cannula into needle hub cavities.
Fuel tank component packs are assembled automatically.
A special assembly machine has been developed by Lambert Engineering for TI Automotive on Deeside to perform four different hot plate welding operations to make component carriers fitted inside a fuel tank for a four wheel drive vehicle.
TESTING & INSPECTION
Download this section (385 KB)
Weathering tester now has computer data logging.
Q-Panel Lab Products has equipped its QUV Accelerated Weathering Tester with a new controller that adds further functions.
Lloyd makes HDT and Vicat testing safer.
Heat distortion and Vicat testing can now be carried out in greater safety after improvements made by Lloyd Instruments to its Davenport HDT/VICATPlus instrument to ensure that the operator cannot be exposed to hot oil.
Density and titration measurements are automated.
An autosampler for density determinations and a sample changer for Karl Fischer tests have been introduced by Mettler Toledo.
Transmission rate tester for carbonated drinks bottles.
A new instrument from Mocon in the USA, said to be the first of its kind, can verify the shelf life of carbonated beverages contained in plastic bottles by measuring the carbon dioxide transmission rate of the bottle.
Particle size measurements now at 120 degC.
A new option for Malvern's Zetasizer Nano particle characterization systems enables users to measure particle size at temperatures up to 120 degC, extending the range from the standard 90 degC.
Digital gauge reaches new heights.
Bowers Metrology has extended the scope of its Trimos Vectra range of digital height gauges with the addition of a new 2,000 mm capacity model to the existing 300 mm, 600 mm and 1,000 mm models.
Software gives universal testing machines dynamic capabilities.
Lloyd Instruments' universal testing machines can now be used in dynamic materials testing with the aid of the NEXYGEN and Ondio software packages.
TOOLING
Download this section (403 KB)
Delcam previews PowerMILL6 CAM software.
The latest version of Delcam's PowerMILL CAM system includes new functionality for 2-, 3-, and 5-axis machining, plus a number of significant changes to the user interface to make the software easier to use.
New chromium steel from Hasco.
Mould standard parts specialist Hasco has introduced a chromium tool steel with machining characteristics that it says are significantly better than other high chrome corrosion-resistant steels.
ROTATIONAL MOULDING
Download this section (403 KB)
Coating gives old moulds 'a new lease of life'.
A mould coating described as a highly effective alternative to PTFE and conventional release agents has been newly developed by Maus Mould Services.
New compact PE grades have better flow properties.
Two polyethylene grades with enhanced flow properties have been added to Borealis' Borecene Compact series with applications in diesel fuel tanks among others.
Thompson invests further in roto moulding.
Thompson Technik has invested £250,000 in a carousel rotational moulding machine from Alan Yorke and other equipment which increases its roto moulding capacity by 20 per cent.
RECLAMATION & RECYCLING
Download this section (403 KB)
Shred drums and IBCs in the same machine.
New legislation which has come into force this month prevents the disposal of contaminated plastic drums to land-fill. The Metal Machinery Company - Meltog - has developed its Pulvermatic SH3 Rotary Shredder to shred plastic drums and IBCs.
SOFTWARE
Download this section (489 KB)
The net result of colour matching.
Matching, feasibility, formulation: all you need to know about colour - on a global scale. Clive Maier tries out a new internet-based system for giving you the right colour, at the right price, for the right application.
CADfix can handle more file formats.
Transcendata Europe has launched version 7.0 of CADfix, its suite of CAD data translation and repair tools.
OTHER DOWNLOADABLE SECTIONS AND REGULAR FEATURES
Update, Company Report, Materials Marketplace (582 KB)
Energy Saving, Buyers' Guide (1,532 KB)
FACTFINDER CONTACTS FOR THIS MONTH'S ISSUE
101 BASF UK Ltd
PO Box 4, Earl Road,
Cheadle Hulme,
Cheshire
SK8 6QG
0161 485 6222
Web site: www.basf.com102 Brian Ward (Manchester) Ltd
19 Hamson Drive,
Bollington,
Cheshire
SK10 5SS
01625 576622
E-mail: sales@brian-ward.co.uk
Web site: www.brian-ward.co.uk103 Ticona UK Ltd
Hollinswood House,
Stafford Court,
Telford
TF3 3DD
01952 213456
E-mail: sean.kemp@ticona.co.uk
Web site: www.ticona.co.uk104 Brenntag (UK) Ltd
Ham Lane,
Kingswinford,
West Midlands
DY6 7JU
01384 400222
E-mail: Keith.dobell@brenntag.co.uk
Web site: www.brenntag.co.uk105 D-S Brookes Ltd
Unit 33 Hainge Road,
Tividale,
Oldbury, West Midlands
B69 2NY
0121 522 0030
E-mail: info@davis-standard.com
Web site: www.davis-standard.com106 Uniplex Machinery Sales Ltd
28 - 30 High Street,
West Malling,
Maidstone, Kent
ME19 6QR
01732 841619
E-mail: info@uniplexmachinery.co.uk107 TSM Control Systems
The Demesne,
Dundalk,
Republic of Ireland
+353 42 9335560
E-mail: info@tsm-controls.com
Web site: www.tsm-controls.com108 E-Plas Ltd
20 Larch Drive,
Daventry,
Northamptonshire
NN11 5XJ
01327 314442
E-mail: sales@e.plas.com109 Kraiburg TPE (UK)
Business Innovation Centre.
Staffordshire Technology Park,
Beaconside, Stafford
ST18 0AR
01785 241343
E-mail: info-uk@kraiburg-tpe.com
Web site: www.kraiburgtpe.com110 Resin Express Ltd
11 The Valley Centre,
High Wycombe,
Bucks
HP13 6EQ
01494 459881
E-mail: info@resinexpress.com
Web site: www.resinexpress.com111 UPM Machinery Sales Ltd
5 Elder Way, Waterside Drive,
Langley Business Park,
Slough
SL3 6EP
01753 548801
E-mail: sales@upm.co.uk
Web site: www.upm.co.uk112 Granada Material Handling Ltd
Sherwood Park, Queensway,
Rochdale,
Lancashire
OL11 2NU
01706 653620
E-mail: info@gmh.co.uk
Web site: www.gmh.co.uk113 Motan Ltd
Unit 10, Blacklands Way,
Abingdon Business Park,
Abingdon, Oxfordshire
OX14 1RD
01235 550011
E-mail: sales@motan.co.uk
Web site: www.motan.com114 Velox UK Ltd
1 Buckingham Place,
Bellfield Road,
High Wycombe, Buckinghamshire
HP13 5HW
01494 463232
Web site: www.velox.com115 EDI - UK Ltd
Unit E8,
Enderby Road Industrial Estate,
Whetstone, Leicester
LE8 6HZ
0116 286 4371
E-mail: uksales@extrusiondies.com
Web site: www.extrusiondies.com116 Husky Injection Molding Systems UK Ltd
Siskin Drive,
Middlemarch Business Centre,
Coventry
CV3 4FJ
024 7651 8900
Web site: www.husky.ca117 The Metal Machinery Company Ltd
B1 Copley Hill Industrial Estate,
Whitehall Road,
Leeds
LS12 1HE
0113 243 8290
E-mail: sales@mmco.uk.com
Web site: www.meltog.com119 Intertronics
17 Station Field Industrial Estate,
Banbury Road, Kidlington,
Oxfordshire
OX5 1JD
01865 842842
E-mail: sales@intertronics.co.uk
Web site: www.intertronics.co.uk120 Optimation Ltd
PO Box 5479,
Derby
DE1 9HX
0115 930 6000
E-mail: helen.mitchell@ukonline.co.uk121 Welwyn Tool Co Ltd
4 South Mundells,
Welwyn Garden City,
Herts
AL7 1EH
01707 331111
E-mail: tools@welwyntool.co.uk
Web site: www.welwyntool.co.uk/tools122 Intertronics
17 Station Field Industrial Estate,
Banbury Road, Kidlington,
Oxfordshire
OX5 1JD
01865 842842
E-mail: sales@intertronics.co.uk
Web site: www.intertronics.co.uk124 Simplex-Turbulo Company Ltd
Wherwell Priory,
Wherwell,
Andover, Hants
SP11 7JH
01264 860186
E-mail: spares@simplexturbulo.com
Web site: www.simplexturbulo.com/converting.htm125 Davis-Standard Ltd
33 Hainge Road,
Tividale,
Oldbury, West Midlands
B69 2NY
0121 522 0030
E-mail: mrwdsltd@aol.com
Web site: www.davis-standard.com126 Bayer plc, Polymers Division
Bayer House,
Strawberry Hill,
Newbury, Berks
RG14 1JA
01635 563863
E-mail: diane.treacher.dt@bayer.co.uk
Web site: www.bayer.co.uk127 TBA Electro Conductive Products
PO Box 56,
Rochdale,
Lancs
OL12 7EY
01706 647718
E-mail: info@tbaecp.co.uk
Web site: www.tbaecp.co.uk128 Hasco Normalien
Postfach 1720,
D-58513 Ludenscheid
GERMANY
011049235195734
E-mail: info.de.mk@hasco.com
Web site: www.hasco.com129 Bayer plc, Polymers Division
Bayer House,
Strawberry Hill,
Newbury, Berks
RG14 1JA
01635 563863
E-mail: diane.treacher.dt@bayer.co.uk
Web site: www.bayer.co.uk130 Terwin Instruments Ltd
7 Winterbeck Industrial Estate,
Orston Lane, Bottesford,
Nottinghamshire
NG13 0AU
01949 842000
E-mail: info@terwin.com
Web site: www.terwin.com131 Lloyd Instruments Ltd
Forum House,
12 Barnes Wallis Road,
Segensworth East, Fareham
PO15 5TT
01489 486399
E-mail: uk-far.general@ametek.co.uk
Web site: www.lloyd-instruments.co.uk132 Maus Mould Services Ltd
10 Polydon Park Industrial Estate,
Milethorn Lane,
Doncaster
DN1 2SU
01302 327999
E-mail: info@mausmouldservices.co.uk
Web site: www.mausmouldservices.co.uk133 Colortronic (UK) Ltd
Matilda House, Carrwood Road,
Chesterfield Trading Estate,
Chesterfield
S41 9QB
01246 260222
E-mail: sales@colortronic.co.uk
Web site: www.colortronic.co.uk134 Colortronic (UK) Ltd
Matilda House, Carrwood Road,
Chesterfield Trading Estate,
Chesterfield
S41 9QB
01246 260222
E-mail: sales@colortronic.co.uk
Web site: www.colortronic.co.uk135 Colortronic (UK) Ltd
Matilda House, Carrwood Road,
Chesterfield Trading Estate,
Chesterfield
S41 9QB
01246 260222
E-mail: sales@colortronic.co.uk
Web site: www.colortronic.co.uk136 Colortronic (UK) Ltd
Matilda House, Carrwood Road,
Chesterfield Trading Estate,
Chesterfield
S41 9QB
01246 260222
E-mail: sales@colortronic.co.uk
Web site: www.colortronic.co.uk137 Maguire Europe
Unit F, Vanguard, Tame Park,
Tame Valley Industrial Estate,
Wilnecote, Tamworth, Staffordshire
B77 5DY
01827 265850
E-mail: info@maguire-europe.com
Web site: www.maguire.com138 Motan Ltd
Unit 10, Blacklands Way,
Abingdon Business Park,
Abingdon, Oxfordshire
OX14 1RD
01235 550011
E-mail: sales@motan.co.uk
Web site: www.motan.com139 Kistler Instruments Ltd
Alresford House,
Mill Lane,
Alton, Hants
GU34 2QJ
01420 544477
E-mail: sales.uk@kistler.com
Web site: www.kistler.com140 Diemould Service Co Ltd
Unit 11, Blenheim Road,
Cressex Business Park,
High Wycombe, Bucks
HP12 3RS
01494 523811
E-mail: sales@dms-diemould.co.uk
Web site: www.dms-diemould.co.uk141 Cornelius Chemical Co Ltd
Cornelius House,
Woodside,
Bishops Stortford, Herts
CM23 5RG
01279 714300
E-mail: sales.dept@cornelius.co.uk
Web site: www.cornelius.co.uk142 Glassflake Ltd
Forster Street,
Leeds,
West Yorkshire
LS10 1PW
0113 270 3615
E-mail: simon@glassflake.com
Web site: www.glassflake.com143 Chance & Hunt Ltd
Alexander House,
Crown Gate,
Runcorn, Cheshire
WA7 2UP
01928 793000
E-mail: passport@chance-hunt.com
Web site: www.chance-hunt.com144 Delcam International
Talbot Way,
Small Heath Business Park,
Birmingham
B10 0HJ
0121 683 1081
E-mail: marketing@delcam.com
Web site: www.delcam.com145 Bowers Metrology Ltd
Unit 15 Bordon Trading Estate,
Bordon,
Hampshire
GU35 9HH
08708 509050
E-mail: sales@bowers.co.uk
Web site: www.bowers.co.uk146 Lloyd Instruments Ltd
Forum House,
12 Barnes Wallis Road,
Segensworth East, Fareham
PO15 5TT
01489 486399
E-mail: uk-far.general@ametek.co.uk
Web site: www.lloyd-instruments.co.uk147 Vision Engineering Ltd
Monument House,
Monument Way West,
Woking, Surrey
GU21 5EN
01483 248300
E-mail: generalinfo@visioneng.com
Web site: www.visioneng.com148 Q-Panel Lab Products
Express Trading Estate,
Stone Hill Road,
Farnworth, Bolton
BL4 9TP
01204 861616
E-mail: info-eu@q-panel.com
Web site: www.q-panel.com149 Mettler Toledo Ltd
64 Boston Road,
Beaumont Leys,
Leicester
LE4 1AW
0116 234 5074
E-mail: enquire.mtuk@mt.com
Web site: www.mt.com150 Mettler Toledo Ltd
64 Boston Road,
Beaumont Leys,
Leicester
LE4 1AW
0116 234 5074
E-mail: enquire.mtuk@mt.com
Web site: www.mt.com151 TranscenData Europe Ltd
4 Carisbrooke Court, Anderson Road,
Buckingway Business Park,
Swavesey, Cambridge
CB4 5UQ
01954 234300
E-mail: john.meaney@transcendata.com
Web site: www.transcendata.com152 Arrowquint Ltd
Unit KG/E, KG House,
Kingsfield Close,
Northampton
NN5 7QS
01604 655455
E-mail: sales@arrowquint.co.uk
Web site: www.arrowquint.co.uk158 Atoglas Ltd
6270 Bishops Court,
Birmingham Business Park,
Birmingham
B37 7YB
08705 403050
E-mail: maureen.cairns@atoglas.com
Web site: www.atoglas.com166 Malvern Instruments Ltd
Enigma Business Park,
Grovewood Road,
Malvern, Worcestershire
WR14 1XZ
01684 892456
E-mail: salesinfo@malvern.co.uk
Web site: www.malvern.co.uk
ON-LINE
ON-LINE Home
You can download this magazine in sections with all editorial and advertisement web addresses as live hyperlinks.