You can download this magazine in sections with all editorial and advertisement web addresses as live hyperlinks.
Other downloadable back issues.
Contact addresses for the Factfinder reader enquiry numbers in this month's magazine
FILM & SHEET PRODUCTION
Download this section (1,047 KB)
Lab lines planned for training on multi-layer film.
Blown film equipment capable of producing complex multi-layer films is being made available for customer trials and training by Brampton Engineering of Canada and Windmöller & Hölscher of Germany. Brampton is to install nine- and seven-layer lines - the seven layer using the company's downward-blowing AquaFrost process - while W&H's Extrusion Technology Centre has two seven-layer lines, one of which can be configured to produce nine layer film, alongside a three-layer line. Also in the new W&H lab is a Filmex nine-layer cast line equipped with eight extruders.
1,800 kg/hr cast stretch film line for Ukraine.
A Battenfeld Gloucester cast stretch film line has been delivered to a Ukrainian company to make 3 m wide 5-layer film for simultaneous production of six 500 mm rolls at up to 600 m/min in thicknesses from 12 to 50 microns.
Infra red dryers are part of $1 m South African PET sheet project.
UPM Machinery Sales has liaised with the UK branch of Taiwanese thermoforming sheet line producer Sunwell Global to produce a $1 m turn key line for Zibo Containers of South Africa to make PET sheet for forming into fruit boxes. The co-extrusion line is based on a 120 mm main extruder and 65 mm co-extruder. Material is fed through UPM's IRD infra red dryer which dries it to 50 ppm at 700 kg/hr in one pass.
PLA pitch for phone and store cards.
After making increasing headway in packaging products, biodegradable polylactic acid is to be used to make prepaid phone cards. NatureWorks PLA is being incorporated as the base sheet material which makes up 95 per cent of a phone card by UV Color of the USA. The earthsource branded cards are also wrapped in PLA film for multi-pack distribution.
PP sweet wrap runs at a tonne an hour.
Italian manufacturer Gruppo Colines has built its highest output multi-layer cast polypropylene line for a South American company. The Polycast line is making five-layer CPP film, 2,100mm wide and has achieved an output of 1,050 kg/hr.
New German producer of twin wall PP.
A new company, KIBO-Plastics, has started up in Germany making twin wall polypropylene sheet. There are three products with differing internal structures.
More capacity for water soluble film.
Production capacity at soluble film producer MonoSol AF in Hartlebury, Worcestershire, is to be increased as part of an expansion plan by its US-based parent MonoSol.The expansion will include a new blown film line.
Berstorff adds lines for standard packaging sheet.
Berstorff is now building standard thermoforming sheet lines for packaging applications.
Memory printed on plastic film.
An electronic memory device printed on a plastic film has been prototyped by a Japanese research group. The device retains a two-digit drain current on/off ratio for more than 10 days after power is turned off.
Approval certificate 'means winder safety can be trusted'.
Windmöller & Hölscher claims to be the first manufacturer to offer a film winder with a GS approval certificate, based on the German equipment and product safety act and the EU Machinery Directive 98/37/EG.
Small scale calender is redesigned.
Battenfeld's Calandrette alternative to a calender for the production of small or medium-sized batches of PVC film has been revamped and is now available in two new sizes with an extended performance range.
Shrink film line will integrate calendering and stretching.
A line for shrink sleeve film to be brought into service by Italian PVC film and sheet specialist Alfatherm later this year will use a proprietary one-step process to integrate film calendering and stretching.
Davis-Standard builds on Black Clawson control technology.
The integration of Davis-Standard and Black Clawson in May last year to form Davis-Standard Converting Systems Group has brought Black Clawson control technology into the Davis-Standard film and sheet equipment range with the aptly-named Integrator system. Integrator PRO combines total line control and data monitoring into a single point of control and Integrator C is being offered as a replacement for existing Egan CMR control units.
Piovan dedicates temperature control to extrusion.
A range of temperature controllers has been designed specifically for extrusion by Piovan. They have heating capacities up to 80 kW and the water or oil is pumped at high flow and high pressure.
Linear motor improves control of re-winder contact roll.
A Brückner Liwind system, which uses a linear motor instead of hydraulics to control motion and contact pressure of the contact roll, has been installed on a 10 m BOPP line at Manuli Film in Italy.
PE film grade combines toughness with processability.
A new polyethylene grade for blown film production has been introduced by Nova Chemicals for film needing premium toughness and high seal strength without sacrificing processability.
Process aid speeds up PP film production.
A process aid for polypropylene from Viba of Italy is recommended for both blown and cast film, and for BOPP production to increase melt flow and therefore give a higher extrusion speed.
Fast film cuts costs.
Getting high throughput by running small capacity lines very fast can lower both capital and operating costs. Battenfeld Extrusionstechnik has demonstrated a line consisting of 75 mm and 45 mm extruders and downstream running at 900 kg/hr of PP and 1,100 kg/hr of PS.
FILM & SHEET CONVERSION
Download this section (516 KB)
PC helps glass resist bomb blasts and bullets.
Three new transparent armour laminates for glazing applications have been produced by GE Advanced Materials for buildings, armoured vehicles, banks, government offices or wherever personal protection and security are required.
Wardle Storeys takes laminating in-house.
After sending its PVC fabrics and films out to flame laminators for many years, Wardle Storeys has now installed a Web Processing laminating machine to perform this process in-house.
In-line thermoforming gets faster.
In-line thermoforming machines have been developed by Amut to produce 180,000 cups per hour.
AUTOMATION & ROBOTICS
Download this section (630 KB)
Yushin adds robots for use on 100 - 5,000 tonne moulding machines.
Three new Webliner beam type take out robots have been introduced by Yushin for injection moulding machines in the 100 to 220, 1,000 to 1,600 and 1,500 to 5,000 tonne ranges. And the company has also introduced the SXA-300 series of side entry robots for use where machines are operated in clean rooms or where ceiling height is limited, and suitable for 180 to 450 tonne machines.
Automation cells for multiple finishing operations.
Forward+Thompson has developed cell structures for demoulding and secondary finishing operations requiring six-axis robotic handling which can be installed beside the press or for free-standing independent operation.
Ductless design saves space.
The new TM Robotics TH1050 four axis horizontal SCARA robot is built without a cable duct which cuts down the necessary installation space.
Automation is growth business for Sandretto.
Sandretto supplies several variants of the Dal Maschio robot range and supplies a kit of gripper parts with every robot, enabling customers to make their own grippers according to need. More specialist applications for Sandretto automation include in mould labelling, and complex operations requiring six-axis handling for which Sandretto has teamed up with Kawasaki.
More advanced software supports latest robots from ABB.
The Safe Home Run is a feature of ABB's latest programming and control software RobotWare Plastics - Mould. It retains a spatial picture of the robot's operating envelope and enables the robot to move from anywhere in that envelope back to a designated safe position without collisions. So in the event of an unforeseen stoppage the robot does not have to be jogged through movements to clear difficult areas.
Wittmann extends the 7-Series.
Mid-sized linear robots have been added to Wittmann's 7-Series with payloads of 10 to 35 kg and suitable for mounting on injection moulding machines up to 1,200 tonnes.
Automated IR welding system replaces glueing, cuts time and emissions.
An automated infra red welding system with Heraeus Noblelight emitters has been installed at Lichfield-based Hepworth Drainage to make a polypropylene inspection chamber in a cycle time of about 22 seconds, considerably faster than achieved by the previous glueing process.
Air, power and coolant connected in one click.
A system for the simultaneous connection of air, cooling fluids and electricity has been developed by Stäubli and its sister company, Multi-Contact.
Tool changer knows where tools are and what to do if they break.
A new tool change station has been introduced for KMT Cutting Systems' six-axis robotic Cutting Box Routing systems which allows tools to be changed while the routing system is in operation. It also offers an automatic update of tool parameters when a tool is changed.
INJECTION MOULDING
Download this section (736 KB)
Ceramic screws could soon be a reality.
Battenfeld Injection Molding is gearing up for commercial production of ceramic screws for injection moulding machines to resist wear from abrasive and corrosive materials.
Fanuc raises its sights on electric machine sales.
Japanese injection moulding machine manufacturer Fanuc has raised its targets for sales of all-electric machines in Europe with a new joint venture company with its long-time distributor Mitsui.
Hybrid Negri cuts energy costs at Wicks.
The largest Negri Bossi PX machine in the UK at 330 tonnes has been installed at Wicks Plastics in Bolton.
How to persuade more out of packaging machines.
'More value between the tie bars' is Husky's description of the development needed to keep driving down the cost of injection moulded packaging, which includes a more systemised view of the moulding process, and equipment to do within the moulding cycle what otherwise adds time outside.
In-mould closing mechanism is smaller and more powerful.
Profine Molds of Canada has introduced improved mechanisms for closing flip top caps in-mould to reduce post moulding operations.
Tent-in-a-box is an instant clean room.
Clean-Tent, described as 'the cleanroom in a box', is an inflatable tent zipped to a groundsheet that can accommodate a small injection moulding machine.
Micro moulding and parts handling, all within a standard machine.
One of the current Boy demonstration machines touring the world's plastics exhibitions is showing micro moulding on a standard machine fitted with an integral picker within the machine guard and an ionization unit, also mounted on the guard, to keep the moulding area dust-free and prevent electrostatic charging.
Standard insert moulder takes Arburg back to its roots.
The new vertical fully-hydraulic Allrounder 175V is Arburg's first machine for insert encapsulation to be available as a standard model and is reminiscent of the kinds of machines first built by the company 50 years ago.
BLOW MOULDING
Download this section (444 KB)
Biodegradables for barrier bottles?
Barrier bottles made from plastics from renewable sources instead of PET are being researched by NatureWorks, which makes polylactic acid (PLA), a biodegradable plastic made from corn starch.
Blow moulding TPV ups heat resistance.
A new blow moulding grade of thermoplastic vulcanisate that withstands much higher service temperatures has been introduced by Zeon Chemicals for high-temperature automotive boots, bellows and ducts, replacing the earlier options of rubber or heat shielding.
PIPE & PROFILE
Download this section (444 KB)
Wire coating additive speeds extrusion 'by 55 per cent'.
Dow is claiming a potential 55 per cent increase in extrusion speed for wire coating lines using a new polymer additive.
Twin screw extrusion equipment and extrusion measurement systems get UK representation.
German twin screw extruder components manufacturer Extricom now has representation in Britain through former Berstorff general manager Rupert Wilson, alongside a range of surface measurement and inspection equipment made by Pixargus.
COMPOUNDING
Download this section (444 KB)
Revamp for planetary extruder.
Major changes have been made to Battenfeld's series of planetary compounding extruders with the aim of greater flexibility, higher output and lower cost.
Increased business sparks investment at Perrite.
New contracts for a speciality compound used to maintain oil temperature and flow rate in flexible pipes and risers in deep water oil applications will bring a £1 million investment in a new extrusion line at JGP Perrite's Warrington plant.
Clariant plans further investment at Wigan.
Clariant's British masterbatch business is now trading as Clariant Masterbatches UK. Clariant is also upgrading the Wigan site with an investment programme.
World's biggest extruder - again.
Berstorff has an order for an 800 mm single screw extruder for Huntsman's LDPE plant being built on Teesside.
ENGINEERING MATERIALS
Download this section (466 KB)
RoHS compliance needs your attention now.
The forthcoming RoHS Directive, which will limit the use of some materials used in plastics additives, has significant implications. Tin research, development and marketing organisation Tin Technology warns that many companies are still unaware of the full implications of the Directive but should now be taking the necessary steps to meet the deadline date.
FR nylons notch up approvals and certification.
Conformation to RoHS and WEE is assured for new UL-certified glass filled flame retardant halogen- and phosphorus- free nylons from Frisetta.
Distrupol electrical comparator simplifies selection.
Distrupol has added an Electrical Performance Comparator Card to its toolbox of aids for designers and moulders engaged in the development and production of electrical components.
New conductive compound has high impact strength.
A conductive compound with particularly high impact strength for heavy-duty injection moulded products requiring permanent static-safe performance has been introduced by Cabot Corporation.
Improved sealing compounds for low temperatures and higher mechanicals.
New fluoropolymer compounds from Parker Hannifin and Dyneon bring new extremes of operation for hydraulic seals while a new-found ability to injection mould it brings Lanxess EVM into the frame.
Long fibre concentrates cut compound requirements.
There is a growing trend to use dilution technology when injection moulding glass-filled materials to reduce the quantity of compounded material used by diluting a concentrated long glass fibre compound with the PP at the injection moulding stage. Borealis has recently introduced a combination of a concentrate and base polymer with which to blend it, while RTP has produced a concentrate which it says is the most highly filled available.
SMC replaces metal fabrications.
The thermoset load-bearing support frames introduced by Control Techniques are said to be a first for the large AC variable speed drives industry. The frames are produced by compression moulding polyester sheet moulding compound and replace the painted sheet metal fabrications that are conventional in the industry.
Arkema focuses fuel line technologies.
Arkema has grouped its entire range of automotive fuel line multi-layer systems under the new trademark Rilperm. At the same time, the company is introducing a new nomenclature to designate the various Rilperm grades.
PACKAGING MATERIALS
Download this section (466 KB)
Smaller beads for Arcel mouldable foam.
Nova Chemicals has introduced a new version of its Arcel 730 mouldable foam material with a smaller bead size that improves performance and expands the range of packaging applications. The 25 per cent reduction in size places Arcel materials in the same bracket as expandable polystyrene beads.
ADDITIVES
Download this section (466 KB)
New process for carbon nanotubes widens their commercial potential.
The cost of making carbon nanotubes on an industrial scale has been reduced by a process developed by Bayer MaterialScience, which is planning to market the material as Baytubes. Applications are expected in making a plastic moulding electrically conductive so that it can be painted without any further pre-treatment, incorporation in films for anti-static packaging materials, and the electromagnetic interference shielding of computer and mobile telephone housings.
Ciba ties up silver antimicrobial technology.
Ciba Specialty Chemicals has acquired exclusive access to antimicrobial technology based on high porosity elemental silver through a new marketing co-operation with Bio-Gate Bioinnovative Materials of Germany.
TOOLING
Download this section (297 KB)
CopyCAD speeds route from scan data to mould.
The latest release of Delcam's CopyCAD reverse engineering program makes it easier to get from scan data to mould design, thanks to new functions, which include the ability to flatten 3D triangle models into 2D shapes and an extra wrapping option, together with significant speed improvements throughout the program. Delcam's PS-Moldmaker software for the 3D design of injection moulds has also been enhanced.
Tool leasing scheme from the GTMA.
A tool leasing scheme has been started by the Gauge and Toolmakers Association to help both toolmakers and moulders.
Meet the buyers.
A 'meet the buyers' event is to be held by the Gauge and Toolmakers Association and the British Plastics Federation to bring moulding and toolmaking buyers from major companies face to face with potential suppliers.
Fastool project leads to faster electrode production.
The EU-funded Fastool project, led by the GTMA, is now delivering results to toolmakers participating in the project in the form of a new software wizard for milling graphite EDM electrodes.
FSG boosts electrode capability.
Precision tool maker FSG Tool & Die of Pontypridd has bought a new V.Plus-800 5axis machining centre with an advanced vortex extraction system for handling graphite particles to boost its graphite electrode capability.
RECLAMATION & RECYCLING
Download this section (602 KB)
Venting system 'removes more ink than any other'.
The Merritt Cascade system introduced by Davis-Standard is for devolatilising scrap PE, PA fibre, PET, PP and injection moulded materials with an efficiency for moisture or ink removal the company describes as 'surpassing that of other venting systems'.
Biggest tyre recycler gets bigger.
A recycling plant able to reclaim 65,000 tonnes of tyres a year with the capacity to handle 10 per cent of Germany's scrap tyres is to be built near Dorsten/Marl by the Danish Genan group.
Farmers to centralise waste plastics collection.
Two trial waste plastics collections schemes are being set up for Cumbrian farmers this month.
Conair takes over Rapid sales.
Conair Europe has taken over sales and service of Rapid granulators in the UK and Ireland from PL Plastics Machinery.
Tandem granulators reduce operating problems.
A two-stage granulator for tough and glass-filled engineering thermoplastics has been developed by Weima. The machine is intended to handle heavy start-up waste lumps or large volume scrap production material with large dimensions.
Density measurement added to flow measurement system.
The latest version of Plast-Control's Granule Recycling Output Measurement System, the GDC+R, now incorporates an automatic material density measurement system which does not require level sensors or probes.
ENERGY EFFICIENCY
Download this section (4,304 KB)
All-electric moulding brings significant energy and cost benefits.
The second in a series of energy efficiency fact sheets produced by Dr Robin Kent for the Carbon Trust to help plastics processors reduce costs through energy efficiency.
Plastics processors slow to seize free finance.
Small and medium sized companies in polymer processing in Britain are being slow to take advantage of unsecured interest-free loans from the Carbon Trust to finance more energy-efficient machinery.
Rising power costs make the case for all-electric operation.
Graeme Herlihy from Engel shows the effect on part cost of using an electric machine instead of a hydraulic machine under varying operating conditions.
PROTOTYPING
Download this section (358 KB)
Auto dispenser speeds vacuum casting.
The output of vacuum casting machines on high volume projects can be more than doubled using MCP's new Auto Dispenser unit which holds up to 50 kg of resin in a pre-conditioned state, and at the required temperature and vacuum.
When product differentiation may only be skin deep.
Design consultancy Flotek International has introduced a surface prototyping service as an extension of its business providing design, development and application of textures and surface finishes.
3T RPD offers the aluminium look.
The operator of the largest selective laser sintering capability in the UK, 3T RPD, is now producing components in Alumide aluminium-filled nylon material which gives parts a metallic appearance not unlike cast aluminium.
REACTION PROCESSING
Download this section (358 KB)
Cannon sets up its own shop to sell PU moulding machinery.
Cannon has set up its own company to distribute its polyurethane moulding equipment in the UK and Ireland following the closure of its long term agent ESU.
Cavity pressure measurement for RIM processes.
Kistler has introduced a sensor for cavity pressure and temperature monitoring in reaction moulding.
SOFTWARE
Download this section (526 KB)
Words you can work with.
Clive Maier looks at the electronic book form adopted by US science/technology publisher Knovel.
Mattec adds materials and labour forecasting.
New tools that help plastics processors forecast material and labour requirements are included in the new release 6.3 of Mattec Corporation's ProHelp EPM real-time production and process monitoring system.
OTHER DOWNLOADABLE SECTIONS AND REGULAR FEATURES
Materials Marketplace, Update (421 KB)
Company Report, Buyers' Guide (1,928 KB)
FACTFINDER CONTACTS FOR THIS MONTH'S ISSUE
103 Delcam International
Talbot Way,
Small Heath Business Park,
Birmingham
B10 0HJ
0121 683 1081
E-mail: marketing@delcam.com
Web site: www.delcam.com105 TM Robotics (Europe) Ltd
Unit 15, The Weltech Centre,
Ridgeway,
Welwyn Garden City, Hertfordshire
AL7 2AA
01707 871535
E-mail: sales@tmrobotics.co.uk
Web site: www.tmrobotics.co.uk110 Arburg Ltd
Tachbrook Park Drive,
Warwick,
CV34 6RH
01926 457000
E-mail: uk@arburg.com
Web site: www.arburg.co.uk111 Kistler Instruments Ltd
Alresford House,
Mill Lane,
Alton, Hants
GU34 2QJ
01420 544477
E-mail: sales.uk@kistler.com
Web site: www.kistler.com115 Cabot Carbon Ltd
Lees Lane
Stanlow, Ellesmere Port,
Cheshire
CH65 4HT
0151 355 3677
Web site: www.cabot-corp.com116 Frisetta Polymer
16 St Margarets Close,
Salisbury,
Wiltshire
SP1 2RY
01722 339101
E-mail: c.litherland@frisetta.de
Web site: www.frisetta-polymer.de118 Arkema Ltd
6270 Bishop's Court,
Solihull Parkway,
Birmingham Business Park
B37 7YB
0121 329 1310
E-mail: veronique.lamb@arkemagroup.com
Web site: www.arkemagroup.com120 EOS Electro Optical Systems Ltd
The Innovation Centre,
Warwick Technology Park,
Gallows Hill, Warwick
CV34 6UW
01926 623107
E-mail: stuart.jackson@eos.info
Web site: www.eos.info121 MCP Tooling Technologies Ltd
Whitebridge Park,
Whitebridge Way,
Stone, Staffs
ST15 8LQ
01785 815651
E-mail: bbennett@mcp-group.co.uk
Web site: www.mcp-group.com122 Delcam International
Talbot Way,
Small Heath Business Park,
Birmingham
B10 0HJ
0121 683 1081
E-mail: marketing@delcam.com
Web site: www.delcam.com125 Mattec Ltd
Dinnington Business Centre,
Outgang Lane, Dinnington,
Sheffield
S25 3QX
01909 561544
E-mail: a.jewell@mattec.com
Web site: www.mattec.com128 Uniplex Machinery Sales Ltd
28 - 30 High Street,
West Malling,
Maidstone, Kent
ME19 6QR
01732 841619
E-mail: info@uniplexmachinery.co.uk
Web site: www.bex.battenfeld.com129 Davis-Standard Ltd
33 Hainge Road,
Tividale,
Oldbury, West Midlands
B69 2NY
0121 522 0030
E-mail: mrwdsltd@aol.com
Web site: www.davis-standard.com130 Piovan UK
7B Silver Birches Business Park,
Aston Fields, Bromsgrove,
Worcestershire
B60 3EU
01527 879419
Web site: www.piovan.com131 Conair Europe Ltd
350 Edinburgh Avenue,
Slough,
Berkshire
SL1 4TU
01753 215100
E-mail: info@conaireurope.co.uk
Web site: www.conaireurope.co.uk134 Moorfield Associates
Moorfield House, Plumley Moor Road,
Plumley, Knutsford,
Cheshire
WA16 9RS
01565 722609
E-mail: jon@moorfield.co.uk
Web site: www.moorfield.co.uk135 ABB Ltd
Auriga House,
Precedent Drive,
Milton Keynes
MK13 8PQ
01908 350300
E-mail: robotics@gb.abb.com
Web site: www.abb.co.uk136 Rosewood Associates
Westerleigh House,
29 Rosewood Way,
Farnham Common, Buckinghamshire
SL2 3QD
01753 669305
E-mail: rosewoodassoc123@aol.com137 Wittmann (UK) Ltd
Sanders Road,
Finedon Road Industrial Estate,
Wellingborough, Northants
NN8 4NL
01933 275777
E-mail: info@wittmann.co.uk
Web site: www.wittmann.co.uk138 Sandretto (UK) Ltd
Leigh Road,
Swift Valley Industrial Estate,
Rugby, Warks
CV21 1DS
01788 544221
E-mail: welcome@sandretto.co.uk
Web site: www.sandretto.co.uk139 Staubli UK Ltd
Lodge Park,
Hortonwood 30,
Telford, Shropshire
TF1 7ET
01952 671918
E-mail: connectors.uk@staubli.com
Web site: www.staubli.com140 KMT Cutting Systems AB
Eaton Place,
114 Washway Road,
Sale, Cheshire
M33 7RF
0161 374 0734
E-mail: info@kmt-waterjet.com
Web site: www.cuttingbox.com141 Uniplex Machinery Sales Ltd
28 - 30 High Street,
West Malling,
Maidstone, Kent
ME19 6QR
01732 841619
E-mail: info@uniplexmachinery.co.uk143 Plast-Control UK Ltd
Unit 17 Leeward Road,
Ashton,
Preston, Lancashire
PR2 2TE
01772 769963
E-mail: admin@plastcontrol.co.uk
Web site: www.plastcontrol.de144 Weima UK Ltd
Unit 78 Leyland Trading Estate,
Irthlingborough Road,
Wellingborough, Northamptonshire
NN8 1RT
01536 262156
E-mail: sales@weima.co.uk
Web site: www.weima.co.uk146 Gauge and Toolmakers Association
3 Forge House,
Summerleys Road,
Princes Risborough, Bucks
HP27 9DT
01844 274222
E-mail: gtma@gtma.co.uk
Web site: www.gtma.co.uk147 Uniplex Machinery Sales Ltd
28 - 30 High Street,
West Malling,
Maidstone, Kent
ME19 6QR
01732 841619
E-mail: info@uniplexmachinery.co.uk148 Ciba Specialty Chemicals plc
Charter Way,
Macclesfield,
Cheshire
SK10 2NX
01625 665000
E-mail: chris.wells@cibasc.com
Web site: www.cibasc.com149 Gauge and Toolmakers Association
3 Forge House,
Summerleys Road,
Princes Risborough, Bucks
HP27 9DT
01844 274222
E-mail: gtma@gtma.co.uk
Web site: www.gtma.co.uk150 Cannon Solutions (UK) Ltd
Unit 1, Parkway Trading Estate,
Barton Dock Road,
Stretford, Manchester
M32 0TL
0161 866 9909
E-mail: cannonsolutions@cannonviking.com
Web site: www.cannonsolutionsuk.com162 Yushin Automation Ltd
16 Silver Birches Business Park,
Aston Road,
Bromsgrove
B60 3EU
01527 558218
E-mail: Sales@YushinAutomation.com
Web site: www.yushinautomation.com163 Forward + Thompson
Atlas Road,
Clifton Moor,
Clifton, York
YO30 4UR
01904 690999
E-mail: sales@forward-group.com
Web site: www.forward-group.com163 Frontline Global Marketing Services
Rookwood,
Bradden,
Towcester
NN12 8ED
01327 860949
Web site: www.frontlinegms.com
ON-LINE
ON-LINE Home
You can download this magazine in sections with all editorial and advertisement web addresses as live hyperlinks.